Operable Walls ANC-610PP

ANC Operable Walls ANC-610PP individual panels, top supported by radial type, steel ball-bearing wheels, move one panel at a time and are pre-programmed to makeup openings and store the same way every time. Heights to 24’0″ (7315mm).

n.bern horz2


ANC Series 600 operable walls have attained ratings of STC 52 and STC 49.

Operable Walls Product Features

Product Specs
Cad Drawings
Owner Manual
Operating Manual
Product Brief



Sound Transmission Class (STC) ratings to STC 52

4 1/4″ (108mm) thick panels
Class “A” flame spread rating
Full height pin-tackable surfaces
Available to 24 feet (7315mm) high
Sheer Look panel edges with no exposed trim

Operation Manually Operated
Panel Configuration & Stacking Pre-Programmed individual panels side, center, offset or remote stack with 6″ radius curve and diverter stack assemblies.
Sound Transmission Class (STC) & Appx Panel Weights STC 52 Steel Faced Panels, 8.1 Lbs/Ft2 (39.5 Kg/m2)
STC 52 Gypsum or MDF Faced Panels, 7.5 Lbs/Ft2 (36.6 Kg/m2)
STC 49 Steel Faced Panels, 7.3 Lb/Ft2 (35.6 Kg/m2)
STC 49 Gypsum or MDF Faced Panels, 6.6 Lb/Ft2 (32.2 Kg/m2)
Top Seals Sweepseals standard, clearance-type Autoseals or Manuseals optional
Bottom Seals Clearance-type Autoseals standard, clearance-type Manuseals or sweepseals optional
Final Closure Available with jamb-hinged single or communicating panel; expandable panel wall-to-wall, offset or remote stack; expandable panel seal to pocket door; and trail panel seal through pocket door or pocket slot closures
Panel Thickness 4 1/4″ (108mm)
Framing & Substrate Standard pin-tackable gypsum board (or optional MDF or steel over gypsum board) faces machine bonded to heavy duty steel-gusseted inner frames and reinforced with full height protective formed steel framing astragals on both vertical edges of all panels
Support Gusseted, welded and reinforced top frame carrier bolt support
Track & Carriers Type 7/8 Pre-Programmed heavy-duty white aluminum track with quiet, smooth rolling steel ball bearing carriers with nylon or steel wheels
Type 5 Pre-Programmed 7 gauge high-yield steel track with smooth rolling radial-type steel ball-bearing wheels
Maximum Ceiling Height 24′ 3″ (7391mm)
Panel Edges Sheer Look® wrap around panel faces and bronze finish deep nesting universally interlocking panel edges made of steel for extra impact strength and fire resistance; optional protective edge-of-face trim available
Surfacing Materials Wide selection of standard vinyls, fabrics, carpets, wood veneers and laminates, or a material of your own

Fire Ratings Non-combustible panel construction with Class “A” flame spread rating.
Eco-Friendly Product Helps projects achieve LEED certification points.
Pass Doors Single and Double pass doors are of the same thickness and acoustical construction as the panels in which they reside, and may be specified with self-illuminated exit signs, Autoclosers, key locks, push plates, panic hardware and windows
Pocket Doors Single, Double, Bi-Fold, 3-Section, Double w/ Slot Closure and Slot Closure only pocket doors available.
Other Options Full and partial height chalkboard, markerboard, projection and tackable cork work-surfaces
Full and partial height windows glazed with Lexan, Plexiglass, or unglazed
Joining and intersecting walls with complex layouts