Operable Walls ANC-610MD

Operable Walls ANC-610MD Multi-Directional, individual panels, easily negotiate 90 degree 2, 3, and 4-way track intersections. Each panel can be turned in any direction, anywhere along the track grid allowing the panels close off alternative openings and/or be stored in alternate locations when not in use.ANC Model 610MD panels are available in heights to 16’0″ (4877mm).

ACOUSTICAL PERFORMANCE

ANC Series 600 operable walls have attained ratings of STC 52 and STC 49.

Product Data:

Product Specs
Cad Drawings
Owner Manual
Operating Manual
Product Brief

Sound Transmission Class (STC) ratings to STC 52
Class “A” flame spread rating
Available to 16 feet (4877mm) high
Full height pin-tackable surfaces
Sheer Look® panel edges with no exposed trim
4 1/4″ (108mm) thick panels

 

Model 610MD Technical Data

OPERATING FEATURES
Operation Manually Operated
Panel Configuration & Stacking Multi-directional individual panels side, center, offset or remote stack with sharp 90 Dgr. 2-Way, 3-Way and 4-Way intersections
Sound Transmission Class (STC) & Appx Panel Weights STC 52 Steel Faced Panels, 8.1 Lbs/Ft2 (39.5 Kg/m2)

STC 52 Gypsum or MDF Faced Panels, 7.5 Lbs/Ft2 (36.6 Kg/m2)

STC 49 Steel Faced Panels, 7.3 Lb/Ft2 (35.6 Kg/m2)

STC 49 Gypsum or MDF Faced Panels, 6.6 Lb/Ft2 (32.2 Kg/m2)

Top Seals Sweepseals standard, clearance-type Autoseals or Manuseals optional
Bottom Seals Clearance-type Autoseals standard, clearance-type Manuseals or sweepseals optional
Final Closure Available with L-Jamb; jamb-hinged single or communicating panel; expandable panel wall-to-wall, offset or remote stack; expandable panel seal to pocket door; and trail panel seal through pocket door or pocket slot closures
Panel Thickness 4 1/4″ (108mm)
Framing & Substrate Standard pin-tackable gypsum board (or optional MDF or steel over gypsum board) faces machine bonded to heavy duty steel-gusseted inner frames and reinforced with full height protective formed steel framing astragals on both vertical edges of all panels
Support Gusseted, welded and reinforced top frame carrier bolt support
Track & Carriers Type 9 multi-directional heavy-duty white aluminum track with dual horizontal rotating ball-bearing carriers
Maximum Ceiling Height 16′ 3″ (4953mm)
Panel Edges Sheer Look® wrap around panel faces and bronze finish deep nesting universally interlocking panel edges made of steel for extra impact strength and fire resistance; optional protective edge-of-face trim available
Surfacing Materials Wide selection of standard vinyls, fabrics, carpets, wood veneers and laminates, or a material of your own
OTHER FEATURES
Fire Ratings Non-combustible panel construction with Class “A” flame spread rating.
Eco-Friendly Product Helps projects achieve LEED certification points.
Pass Doors Single and Double pass doors are of the same thickness and acoustical construction as the panels in which they reside, and may be specified with self-illuminated exit signs, Autoclosers, key locks, push plates, panic hardware and windows
Pocket Doors Single, Double, Bi-Fold, 3-Section, Double w/ Slot Closure and Slot Closure only pocket doors available.
Other Options Full and partial height chalkboard, markerboard, projection and tackable cork work-surfaces

Full and partial height windows glazed with Lexan, Plexiglass, or unglazed

Joining and intersecting walls with complex layouts